Name |
Type |
review |
Additional information |
VSK 23 |
Thinners |
Mostly
aliphatic hydrocarbons (white spirit). For use in
all conventional alkyd paints or oil varnishes. Not
suitable for paints based on other raw materials
Flash point + 40°C |
|
VCC 20 M |
Thinners |
Mostly
aromatic hydrocarbons. Use in chlorinated rubber
based systems, In varnishes based on coal tar pitch,
quick-drying short oil alkyd paints and antifouling.
Flash point +27°C |
|
VEP 46 |
Thinners |
Aromatic
hydrocarbons, ester, ketones. Use for all pure
epoxy-systems. Addition after mixing base and
hardener. Flash point + 24°C |
|
VEP 47 |
Thinners |
Xylene,
alcohols, ketones. Use for high build epoxy
coatings. Quicker evaporation than THINNER VEP 46.
Flash point +18°C |
|
VPV 51 |
Thinners |
Aromatic
hydrocarbons, Ester, Ketones. Use for all vinyl
copolymers and vinyl copolymer-combinations. This
type of thinner can in view of the strong solving
effect be used as thinner for nitro-cellulose and
for cleaning and degreasing Flash point + 22°C |
|
VFE 35 |
Thinners |
Aromatic
hydrocarbons, ester, ketones. Use for polyurethane
based paints. In 2-pack systems addition after
mixing base and hardener. Flash point + 25°C
|
|
VPB 52 |
Thinners |
Aromatic
hydrocarbons and ester. Especially created for
thinning and cleaning of shop primer. Usage for
degreasing is also possible. Flash point + 7°C |
|
VEE 82 |
Thinners |
Ketones
and alcohols. Use for zinc-silicate paints. Flash
point + 7°C
|
|